CasioメーカーXJ-M240の使用説明書/サービス説明書
ページ先へ移動 of 26
* USB por t models * Modèles à por t USB * Modelos con puer to USB D A T A PR OJECT OR XJ-M140 / XJ-M145 * XJ-M150 / XJ-M155 * XJ-M240 / XJ-M245 * XJ-M250 / XJ-M255 * D A T A PR OJECT OR XJ-M140 / X.
Contents E Safety Precautions ..................................... E-1 Operating Precautions ............................... E-7 About the Light Source Unit .......................... . E-7 Laser Precautions ...... ..................... .............
E-1 Safety Precautions Precautions During Use ● Smoke, odor, heat, and other abnormalities Should you ever n o tice smoke, strange odor, or any o ther abnormality, immediately stop us ing the projector. Continued use creates th e risk of fire and electric shock.
Safety Precautio ns E-2 ● Power cord Misuse of the power co rd creates the risk of fire and electric shock. Make sure that you alway s observe the following precautions. • Be sure to use only th e accessories that come with the projector. • Make sure that you use a power source with the same voltage as that s pecified for the projector.
E-3 Safety Precautions ● Disposal by burning Never try to dispose of the projector by burning it . Doing so can cause an explosion, which creates the risk of fire and personal injury. ● Looking into the lens or vents while light source unit is on Never look directly into th e lens or vents while light source unit is on.
Safety Precautio ns E-4 ● Using the projector on a base with casters Whenever using th e projector on a base that has casters, make sure that you lock the casters when not moving the base. ● Lightening During a lig htening storm, do not touch the pl ug of the projector’s power cord.
E-5 Safety Precautions Battery Precautions Misuse of batteries can cause them to leak and stain the area around them, or to explode, creating the risk of fire and per sonal injury.
Safety Precautio ns E-6 3D Glasses 3D images shou ld not be viewed by the types of individu als described below. Doing so cr eates the risk of loss of health.
E-7 Operating Precautions z The projector’s ligh t so urce unit uses a laser and LED. z The life of the light source unit is rated at appro ximately 20,000 hour s. The actual lif e will depend on use conditions, the settings configured on the setup menu, an d differences between each individual light source unit .
Operating Precauti ons E-8 This projector is made of precision components. Fa ilure to observe the foll owing precautions can result in inability to correctly save data and malf unction. ● Never use or store the projector in the following locations.
E-9 Operating Preca utions ● Keystone Correction and Image Quality Performing keystone cor rection cau ses the image to be compressed befor e it is projec ted.
E-10 Unpacking As you unpack the pr ojector, check to make sure that all of the items listed below are present. DATA PROJECTOR Remote Controller (YT-120) Mini D-Sub Cable • Test Batteries (AAA-size .
E-11 Getting Ready Important! I m p o r t a n t ! Important! z Be sure to us e alkali ne batteries only. Replacing Remote Controller Batteries Open the battery cover on the back of the remote controll er, replace the old batteri es wit h new ones, and then close the battery cover.
Getting Ready E-12 z Use a conveniently located power outlet that yo u can reach easily when you need to unplug the projector. z Do not allow any objects to be within the area indi cated by the dashed line below, which is an area within 30cm (11.8 inches ) of the projector.
E-13 Getting Ready 3. Make fine adjustments to the elevati on angle of the projector by rotating the front foot. 4. Make fine adjustments to the horizontal tile of the projector by rotati ng the rear feet 3 .
E-14 Starting and Stopping Projection 1. Use the bundled AC power cord to plug the projec tor into a power outlet. NOTE z This product is also des igned for IT power distri bution s ystem with phas e-to-phase voltage 230V. 2. Turn on the computer that is connected to the projector.
E-15 Starting and Stopping Projection 1. Press the [ P ] (Power) key. z This causes the confirmation message to appear. If you do no t turn off the projector the confirmation message wi ll disappear automati cally after about 10 seco nds. The confirmation message will also disappear if you press the [ESC] key.
E-16 Using the CD-ROM The CD-ROM contains software for each projector model and PDF files with User’s Guides . In order to read the User’s Guide, you need to have Adobe ® Reader ® installed on yo ur computer. 1. Place the CD-ROM th at comes with the projector into your computer’s CD-ROM drive.
E-17 Indicators Indicators keep you informed about th e current operational status of th e projector. The following show s what the indicators look like when operation is norm al.
E-18 Troubleshooting Check the following item s wh enever you experience any pr oblem with the projector . Problem Cause and R ecommended Action Power does not turn on. z If the POWER/S TANDBY indicator is no t lit, the AC power cord is not connected correctly.
E-19 Troubleshooting Important! I m p o r t a n t ! Important! z Try performing the following step s, which may or may not return the projector to normal operation. z If normal operation does not re sume after you perform the above steps, take the projector to your retailer or authorized CASIO service center.
E-20 Main Specifications Specifications are subject to change without notice. Model Name XJ-M140/ XJ-M145/ XJ-M240/XJ- M245 XJ-M150/ XJ-M155/ XJ-M250/XJ- M255 Brightness (ANSI Lume ns) 2500 3000 Envir.
GUIDELINES LAID DOWN BY FCC RULES FOR US E OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and foun d to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC Information This device, IEEE 802.11g Wi reless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is subject to the following two con ditions: (1) this device may not cause harm ful interference, and (2) this device must accept any interferen ce received; including in terference that may cau se undesired operation.
Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: CASIO EUROPE GmbH Casio-Platz 1, 22848 Norderstedt, Germany D.
Printed in China Imprimé en Chine MA1202-D RJA524095-002.
デバイスCasio XJ-M240の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Casio XJ-M240をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCasio XJ-M240の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Casio XJ-M240の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Casio XJ-M240で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Casio XJ-M240を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCasio XJ-M240の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Casio XJ-M240に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCasio XJ-M240デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
