FujiFilmメーカーA605の使用説明書/サービス説明書
ページ先へ移動 of 43
Getting Ready Using the Camera Advanced Features Software Installation Settings Viewing Images BL00396-100 ( 1 ) 1 2 3 4 5 6 This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A605 correctly. Please follow the instructions carefully.
3 2 W arning Please read the Safety Notes ( ➡ P.81) and make sure you understand them before using the camera. IMPORT ANT Be sure to read this page before using the Software. NOTICE BEFORE OPENING THE PACKAGE OF CD-ROM PROVIDED BY FUJI PHOTO FILM CO.
5 1 2 3 4 5 6 4 Contents LOADING THE BATTERIES AND THE MEDIA ............................................................................. 10 TURNING ON AND OFF ..........................................................................................
6 7 Preface Accessories included ■ Test Shots Prior to Photography For important photographs (such as weddings and overseas trips), always take a test shot and view the image to make sure that the camera is working normally. h Fuji Photo Film Co., Ltd.
8 9 Camera parts and features １００ー０００１ １ １ ２００４ １２：００ ＡＭ Number of available frames Battery level warning Quality mode AE warning Camera shak.
10 11 Getting Ready 1 LOADING THE BA TTERIES AND THE MEDIA 2 Load the batteries correctly as indicated by the polarity icons. 1 Check that the camera is turned off (viewfinder lamp is off) before opening the battery cover. ● ! Opening the battery cover while the camera is on, the camera is turned off.
12 13 Getting Ready 1 TURNING ON AND OFF SETTING THE DA TE AND TIME Open the lens cover to turn the camera on in Photography mode. Close the lens cover to turn the camera off. Move to Photography mode or Playback mode After purchasing the camera, first time when you turn camera on, the date and time are cleared.
14 15 Getting Ready 1 SELECTING THE LANGUAGE CORRECTING THE DA TE AND TIME / CHANGING THE DA TE ORDER 1 ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ ＯＰＴＩＯＮ ＯＰＴＩＯＮ ＬＣＤ ＬＣＤ 2 1 Press “ d ” or “ c ” to move to option 2 and then press “ a ” or “ b ” to select “DATE/TIME”.
Display Status Lit green Ready to shoot Blinking green and orange alternately Recording to xD-Picture Card (Ready to shoot) Lit orange Recording to xD-Picture Card (Not ready) Blinking orange Flash charging (Flash will not fire) Blinking green (1-second intervals) Camera in Power Save mode ( ➡ P.
19 Using the Camera 2 VIEWING YOUR IMAGES ( PLA YBACK ) PLAYBACK MODE Single-frame playback 1 Press the “Playback” button for approx. 1 second to change to Playback mode. 2 Press “ c ” to scan forward through your images and Press “ d ” to scan backwards.
21 Using the Camera 2 20 ERASING IMAGES ( ERASE FRAME ) PLAYBACK MODE 1 Press the “Playback” button for approx. 1 second to turn the camera on in Playback mode. 2 3 1 Press the “MENU/OK” button during playback to display the menu. 2 Press “ d ” or “ c ” to select “ o ” ERASE.
23 Advanced Features 3 22 e MACRO ( CLOSE-UP ) STILL PHOTOGRAPHY FUNCTIONS ON １９ １９ Select Macro mode to take close-up shots.
25 Advanced Features 3 24 d Forced flash Use this mode in backlit scenes, such as a subject against a window or in the shade of a tree, or to get the correct colors when taking a picture under bright lighting. In this mode, the flash fires in bright as well as dark conditions.
27 Advanced Features 3 26 A countdown appears on the LCD monitor indicating the time remaining until the picture is taken. Self-timer mode is cancelled after each shot.
29 Advanced Features 3 28 D EV ( EXPOSURE COMPENSATION ) q SHOOTING MODE A WHITE BALANCE ( SELECTING THE LIGHT SOURCE ) ＥＶ ＥＶ ＋０ ６ ＋０ ６ ＋０ ３ ＋０ ３ −０ ３ −０ ３ ０ Select EV in the “ q MANUAL” photography mode.
31 Advanced Features 3 30 ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ １００−０００９ １００−０００９ ＥＲＡＳＥ ＥＲＡＳＥ ＯＫ？ ＯＫ？ ＦＲＡＭＥ ＦＲＡＭＥ FRAME 1 Press “ d ” or “ c ” to select the frame (file) to be erased.
33 Advanced Features 3 32 4 1 Press “ d ” or “ c ” to display the frame (file) for which you want to specify DPOF settings. 2 Press “ a ” or “ b ” to set a value up to 99 as the number of copies of the frame (file) to be printed. For frames (files) that you do not want printed, set the number of prints to 0 (zero).
35 Advanced Features 3 34 i PROTECTING IMAGES ( FRAME / SET ALL / RESET ALL ) PLAYBACK MENU 1 2 3 ＦＲＡＭＥ ＦＲＡＭＥ ＰＲＯＴＥＣＴ ＰＲＯＴＥＣＴ ＲＥＳＥＴ ＲＥＳ.
37 Advanced Features 3 36 Press “ d ” or “ c ” to select “ g ” PLAYBACK. 1 Press “ a ” or “ b ” to select the playback interval and the type of image transition. 2 Press the “MENU/OK” button. The image frames are advanced and played back.
39 Advanced Features 3 38 5 Check the saved image size and press the “MENU/OK” button. The cropped image is added as a separate file in the final frame. 3 1 ■ Image Sizes Best for A5 or A4 size prints. Best for A6 size prints. ` For an image attached to E-mail or used on a website.
41 Advanced Features 3 40 Press the Shutter button down fully to start recording. ● ! The brightness and color of the LCD monitor shown during movie recording may differ from those shown before recording begins. ● ! Do not need to hold down the Shutter button.
43 Advanced Features 3 42 r PLA YING BACK MOVIES PLAYBACK MODE ＰＬＡＹ ＰＬＡＹ 1 1 Press the “Playback” button for approx. 1 second to turn the camera on in Playback mode. 2 Press “ d ” or “ c ” to select the movie file. Indicated by the “ r ” icon.
45 Settings 4 44 SET -UP F USING THE SET-UP SCREEN ● ! Always turn the camera off when replacing the batteries. Opening the battery cover or disconnecting the AC power adapter without turning the camera off may cause the camera settings to revert to the factory default values set at shipment.
47 Settings 4 46 When the camera is in Sleep mode, pressing “ a ”, “ b ”, “ d ” or “ c ” wakes the camera up. This is useful since the camera can be ready to take pictures instantly. Pressing also the Shutter button wakes the camera up.
49 Settings 4 48 FRAME NO. CONT. : Pictures are stored beginning from the highest file number stored on the last xD- Picture Card used. RENEW : Pictures are stored on each xD-Picture Card beginning with a file number “0001”. Setting this function to “CONT.
51 Software Installation 5 50 1 Install FinePixViewer as instructed in the Quick start guide. 2 After restarting the PC, install DirectX as directed by the on-screen instructions and then restart your PC again. If the latest version of DirectX is already installed on your PC, this installation is not performed.
53 Software Installation 5 52 2 Click the [Save] button. 4 The Installer setup screen appears. Click the [Installing FinePixViewer] button. ● ! For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button.
55 Software Installation 5 54 5.3 INST ALLA TION ON A Mac OS X Pre-installation checklist To run this software, you must have the hardware and software described below.
57 Software Installation 5 56 10 The “FinePixViewer installation completed” message dialog appears then click exit button and close it. 11 Launch “Image Capture” from the “Applications” folder. 12 Change the Image Capture settings. Select “Preferenes.
59 Viewing Images 6 58 If a printer that supports PictBridge is available, images can be printed by connecting the camera directly to the PictBridge-compatible printer without using a computer. 6.2.1 Specifying images for printing on the camera 4 1 Press “ a ” or “ b ” to select “ u PRINT DPOF”.
61 Viewing Images 6 60 ● ! “PRINT WITH DATE” is not available when the camera is connected to a printer that does not support date printing. ● ! Press the “DISP/BACK” button to cancel the printing. Depending on the printer, the printing may not be canceled immediately or printing may stop mid way through.
63 Viewing Images 6 62 h When the camera and PC are exchanging data, the self-timer lamp blinks and the viewfinder lamp blinks alternately green and orange. h “ ≥ ” appears on the LCD monitor. h Power save and Auto power off are disabled during USB connection.
65 Viewing Images 6 64 6.3 CONNECTING TO A COMPUTER Windows XP 1 The “Found New Hardware” help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. ● ! This step is not required for subsequent connections.
67 Viewing Images 6 66 6.4 USING FinePixViewer For all information on FinePixViewer functions, refer to “How to Use FinePixViewer” in the Help menu for details. ■ Example: Looking up slide shows 1 Click “How to Use FinePixViewer” in the FinePixViewer Help menu.
69 Accessories Guide e Visit the FUJIFILM web site for the latest information on camera accessories. http://home.fujifilm.com/products/digital/index.html h xD-Picture Card DPC-16 (16 MB)/DPC-32 (32 MB.
71 70 ■ Disposing of Batteries When disposing of batteries, do so in accordance with your local waste disposal regulations. Always use only the AC Power Adapter AC-3V (sold separately). The use of other AC power adapters may result in damage to your camera.
73 72 Notes on the xD-Picture Card™ ■ Image Memory Card h This Image Memory Card is a new image recording media ( xD-Picture Card ) developed for digital cameras. The Image Memory Card consists of a semiconductor memory (NAND-type flash memory) to record digital image data.
75 74 Displayed for PictBridge. i Check that the USB cable is connected properly. i Check that your printer is turned on. Displayed for PictBridge. i Check that the printer is not out of paper or out of ink. i Turn the printer off briefly and then turn it back on.
77 76 Troubleshooting Possible causes Solutions Frame erase does not erase the frame. The ERASE ALL function does not erase all the frames. Screens are not displayed in English. There is no image on the TV. When the camera is connected to a personal computer (PC), the photographed image appears on the camera’s LCD monitor.
79 78 Power Supply and Others Power supply Use one of the following: i 2 × AA-size alkaline batteries i 2 × AA-size Ni-MH (nickel-metal hydride) batteries (sold separately) i AC Power Adapter AC-3V .
81 80 Safety Notes h To ensure that you use your FinePix A605 camera correctly, read these Safety Notes and your Owner’s Manual carefully beforehand.
82 Safety Notes CAUTION Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight.
Printed in China FGS - 406104 - Ni 26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan http://home.fujifilm.com/products/digital/.
デバイスFujiFilm A605の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
FujiFilm A605をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujiFilm A605の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。FujiFilm A605の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。FujiFilm A605で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
FujiFilm A605を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujiFilm A605の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、FujiFilm A605に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujiFilm A605デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
