BrotherメーカーPersonal Embroidery Design Software Systemの使用説明書/サービス説明書
ページ先へ移動 of 50
ENGLISH XE1182-001 Printed in China << PE-Design V er .7.0 QRG >> cov er 1-4 Personal Embroidery Design Softwar e System Ve r . 7 Quick Refer ence Guide.
IMPORTANT INFORMATION: REGULATIONS Federal Communications Commissions (FCC) Declaration of Conformity (For USA Only) Responsible Party: Brother International Corporation 100 Somerset Corporate Bouleva.
Congratulations on choosing our product! Thank you very much for purchasing our product. To obtain the best performance from this unit and to ensure safe and correct operation, please read this Quick Reference Guide carefully, and then keep it in a safe place together with your warranty.
2 Quick Reference Guide Table of Contents Before Use ....................................................................................4 Fea tures ............................................................................................. 4 Basic Opera tion Map .
3 Table of Contents Instruction Manual (viewed from computer) After the software has been installed, the Instruction Manual can be viewed from the software appli- cation window. The Instruction Manual provides operating procedures and descriptions for the vari- ous functions of the software.
4 Before Use Features What You Can Do With This Software This software provides digitizing and editing capabilities, allowing you the creative freedom to design original embroidery. Easily turn illustrations, photos and lettering into custom embroidery designs.
5 Features Have Fun Creating Embroidery Patterns Manually You can combine embroidery patterns or apply stitching to drawings and text. In addition, you can design a wider variety of embroidery patterns by using the many sew types available. “Arranging Embroidery Patterns (Layout & Editing)” in the Instruction Manual.
6 New Features of Version 7 ■ Stitch generation features • Added Line Sewing Type: Triple Stitch • Added Region Sewing Type: Random Walking Stitch (stippling-style stitch) • Variations of unde.
7 Features Applications of the Software This package consists of fi ve applications. ■ Layout & Editing Layout & Editing is used to automatically create embroidery patterns from images, and to com- bine images and text to create embroidery patterns that can be written to an original card.
8 ■ Design Center Design Center is used to manually create embroidery patterns from images using a four-stage pro- cedure. The images may come from scanning a printed image or can be created with an appli- cation like Paint ® .
9 Basic Operation Map Basic Operation Map Design Center Manually create embroidery patterns from image •file name: .pel, .pem Create custom stitch patterns •file name: .pas, .pmf Manage design files Combine different patterns into an embroidery design •file name: .
10 Introduction Package Contents Check that the following items are included. If anything is missing or damaged, contact your author- ized dealer or Brother Customer Service.
11 Introduction Optional Supplies Note: • The only original cards that can be used with this USB card writer module are those like the one enclosed or optional original cards of the same type. Memo: • Additional blank original cards can be purchased through an authorized dealer.
12 Installation (Please read before Installing!) Please Read Before Installation • Before beginning the installation, check that the computer meets the system requirements. • In order to install the software, you must log on to the computer using an account with administra- tor privileges.
13 Installation System Requirements Before installing the software on your computer, make sure that the computer meets the following minimum PC requirements. Computer IBM-PC or compatible computer Operating system Windows ® 2000, XP Processor Pentium III 800 MHz or higher Memory 128 MB (512 MB or more is recommended.
14 → A dialog box appears, allowing you to select the folder where the software will be installed. → After a short while, the Choose Setup Language dialog box automatically appears. → The InstallShield Wizard starts up, and the fi rst dialog box appears.
15 Installation → When the installation is completed, the following dia- log box appears, suggesting that the computer be re- started. Note: • Even though the installation is completed, do not remove the CD-ROM from the computer’s CD-ROM drive. Memo: • If the following dialog box appears, it is not necessary to restart the computer.
16 Step 2: Installing the Driver for the Card Writer Module This section describes how to install the driver for the card writer module. a Plug the USB connector into the USB port on the computer. Make sure that the connector is fully inserted. b Install the driver for the card writer module.
17 Installation ■ For Windows ® XP without Service Pack 2 in- stalled and connected to the Internet: The installation of the driver is completed automatically (Steps b through c are not required.). ■ For Windows ® XP not connected to the In- ternet: Note: • Depending on the computer, this dialog box may not appear.
18 ■ For Windows ® 2000: To install the new driver for the USB card writer module, select Search removable media (fl oppy, CD-ROM...) , and then click Next . Select Search for a suitable driver for my device (recommended) , and then click Next . Select CD-ROM drives , and then click Next .
19 Installation c Follow the instructions of the Found New Hardware Wizard (or Add New Hardware Wiz- ard) to complete the installation of the driver. d Remove the CD-ROM from the computer’s CD-ROM drive. Step 3: Upgrading the USB Card Writer Module This section describes how to upgrade the USB card writer module for version 7.
20 → The entered product ID and the serial number auto- matically retrieved from the USB card writer module is displayed. → If the upgrade key has been successfully retrieved, the dialog box shown below appears.
21 Installation → If the upgrade has been completed successfully, the dialog box shown below appears. Note: • If a warning appears at any time, follow the instructions that are displayed.
22 Uninstallation a Click the Start button in the task bar, and then click Control Panel. b In the Control Panel window, double-click Add or Remove Programs. c In the dialog box that appeared, select this software, and then click Change/Remove. Contact Technical Support if you have a problem.
23 Using this Quick Reference Guide/Using the Instruction Manual Using this Quick Reference Guide This guide contains descriptions about the preparations necessary to begin using the software. Follow the instructions provided in this manual to complete the preparation and installation of the applica- tion.
24 Opening the Instruction Manual Note: •Before opening the Instruction Manual, make sure that the software has been installed on the com- puter. For details, refer to “Installation (Please read before Installing!)” on page 12. ■ From the Start menu a Click , point to All Programs, then PE-DESIGN Ver7, and then click Instruction Manual.
25 Using the Instruction Manual b Click Start Instruction Manual. The Instruction Manual appears. Operation buttons Buttons for operations, such as changing the page display and printing. Support menu Menu for providing help in using the manual or viewing the desired infor- mation.
26 ■ From the Help menu of the application As an example, the procedure for opening the Instruction Manual from Layout & Editing fol- lows. a Click Help, then Instruction Manual. b Click Start Instruction Manual. PED7_QSG_03.indd Sec1:26 PED7_QSG_03.
27 Using the Instruction Manual The introduction page appears. c Click the button for the desired topic. Memo: • If the Instruction Manual does not appear even after a button is clicked, change the Internet Ex- plorer ® settings according to the instructions that appear in the introduction page.
28 Sew Types The sewing attributes for each sew type are fi rst set to their default settings; however, by changing the settings of the sewing attributes, you can create custom stitching. For details, refer to “Line sew- ing attributes” and “Region sewing attributes” (Layout & Editing and Design Center) of the Instruction Manual.
29 Sew Types Cross Stitch Concentric Circle Stitch Piping Stitch New! Piping Stitch (motif setting) New! Random Walking Stitch New! Memo: • The stitching for the programmable fi ll stitch and the motif stitch depends on the selected stitch pattern.
30 Getting Started Starting Up/Exiting Applications Starting Up Layout & Editing Layout & Editing is used to automatically create embroidery patterns from images and to create embroidery patterns by combining drawn patterns and text. As an example, the Layout & Editing window is shown below.
31 Starting Up/Exiting Applications/Understanding Windows and Using Tools Understanding Windows and Using Tools Layout & Editing Window The default value for the Design Page size in this example is 100 x 100 mm. 1 Title bar 2 Menu bar Provides access to the functions.
32 Design Center Window The default value for the Design Page size in this example is 100 x 100 mm. 1 Title bar 2 Menu bar Provides access to the functions.
33 Understanding Windows and Using Tools Font Creator Window 1 Title bar 2 Menu bar Provides access to the functions. 3 Toolbar Provides shortcuts for the menu commands. 4 Select Character bar Allows characters from created fonts to be selected. 5 Tool Box Used to select and create font pattern.
34 Programmable Stitch Creator Window 1 Title bar 2 Menu bar Provides access to the functions. 3 Toolbar Provides shortcuts for the menu commands. 4 Tool Box Used to select and create fi ll and motif stitch patterns and stamps. (The bottom four buttons do not appear in Motif mode.
35 Understanding Windows and Using Tools Design Database Window 1 Title bar 2 Menu bar Gives access to the functions. 3 Toolbar Provides shortcuts for the menu commands. 4 Folder pane Provides access to the folders on the com- puter and the results of any searches that were performed.
36 Automatically Converting an Image to an Embroidery Design (Auto Punch Function) In this section, we are going to use the Auto Punch function to automatically create an embroidery pattern from an image. This procedure will go through each step of the basic operation.
37 Automatically Converting an Image to an Embroidery Design (Auto Punch Function) b Import the image. Memo: • The default value for the Design Page size in this example is 100 x 100 mm. • You can change the Design Page size by using the menu command Option-Design Page Property .
38 → The image appears in the work area. c Adjust the image size and position. Handles Status bar Memo: • The status bar shows the dimen- sions (width and height) of the image. • The shape of the pointer changes to , , , or , depend- ing on the handle that the pointer is over.
39 Automatically Converting an Image to an Embroidery Design (Auto Punch Function) Step 2: Automatically converting the image to an embroidery pattern Next, the image will automatically be converted to an embroidery pattern. a Select the conversion method.
40 Select Auto Punch , and then click Next . b Convert the image to an embroidery pattern. Check Result View tab to see the preview of the conversion, and then click Finish .
41 Automatically Converting an Image to an Embroidery Design (Auto Punch Function) → The generated embroidery pattern is displayed. Step 3: Displaying a preview of the embroidery Preview the fi nished embroidery. Click Display , then Realistic Preview .
42 Step 4: Saving the embroidery design Once the embroidery design is fi nished, you may want to save it in order to retrieve it later. To return to the normal view, click Display , then Realistic Preview , or click , or press the key. Click File , then Save .
43 Automatically Converting an Image to an Embroidery Design (Auto Punch Function) Select the drive and the folder, and then type in the fi le name. Click Save .
44 Step 5: Transferring the design to an original card By writing a design to a media that can be used in your embroidery machine and transferring it to your embroidery machine, you can actually sew the design. For this example, we will transfer the design to an original card.
45 Automatically Converting an Image to an Embroidery Design (Auto Punch Function) → The following message appears. Note: • Before using the original card, make sure that the designs on the card are no longer needed or make sure to store them on your hard drive or other storage media.
46 If you have a problem, check the following solutions. If the solutions suggested do not correct the problem, contact your authorized dealer or Brother Customer Service. Problem Estimated Cause Solution Page The software is not installed correctly. An operation not described in the instal- lation procedure was performed.
47 Troubleshooting Problem Estimated Cause Solution Page When trying to upgrade from an older version, the message “Cannot connect to the In- ternet.” or “The server could not be connected to. Wait a while, and then try connect- ing again.” appeared and the USB card writer module could not be upgraded.
Read the following before opening the CD-ROM package Thank you for purchasing this software. Before opening the CD-ROM package for this software, carefully read the following Product Agreement, which has been provided for this product. Use this software only if you agree to the terms of this agreement.
デバイスBrother Personal Embroidery Design Software Systemの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Brother Personal Embroidery Design Software Systemをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBrother Personal Embroidery Design Software Systemの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Brother Personal Embroidery Design Software Systemの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Brother Personal Embroidery Design Software Systemで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Brother Personal Embroidery Design Software Systemを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBrother Personal Embroidery Design Software Systemの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Brother Personal Embroidery Design Software Systemに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBrother Personal Embroidery Design Software Systemデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
